The only limit is your
imagination! Camoclad
Truck Accent Kits come in a
variety of sizes and all 15 camo
patterns. So there's a kit
to suit any application and
style. You just have to
decide if you want to
go mild, wild, or somewhere in
the middle.
There is no right or wrong.
It's your truck! So make
it the way YOU want it.
Maybe you want your effect to be
subtle - perhaps a classy rocker
panel accent to add a touch of
rugged distinction. Or
maybe you want to make a bold
statement and clad the entire
center contour. Maybe you
have some creative ambitions for
a truly radical scalloped look.
It's up to you!
Either way, your Camoclad truck
will be unique - one of a kind.
So whether you go mild, wild, or
somewhere in-between, everyone
is going to know YOUR truck when
they see it.......as they
should!
So where do you begin?
The first step is to measure
your truck.
Accent material comes in long
"strips". So you'll just
need two basic measurements:
how long
the strips need to be and
how wide
they'll need to be.
LENGTH: The Camoclad
accent material comes in 30' or
40' total lengths. Half
goes on one side of the truck,
half on the other. For a
short-wheel base truck (Jeep,
Ranger, S-10, Compact SUV, etc.)
the 30' kit will likely be
enough. For longer wheel
base vehicles (Full Size
Pick-Ups, Suburbans,
Expeditions, Denalis, etc.) the
40' length will probably be
required. But to know for
sure, you should measure before
you order your Camoclad.
EXAMPLE: You intend to do
a rocker panel accent and the
total length along the side of
the vehicle is 18 ft. In
this case, you'll need roughly
36' of material. So you'll
need to order the 40' length
accent kit.
WIDTH: Camoclad accent material
is available in widths of 8",
11.5", 15", and 23". The
correct choice will depend on
the width of the area where you want to install it.
For example, if you want to add
Camoclad from the lower door
molding down (like the white
truck pictured left), you'll
need to measure the distance
from the molding to the bottom
of the door or rocker panel.
Find the widest point and then
add 2" to allow for
trimming and folding around door
edges.
You can always trim away a small
amount of excess, but you can't
stretch a short piece to make it
fit. So if in doubt, order
the larger size. If you
intend to install your Camoclad
between body contour lines or
effect panels (like the black
truck at left), you'll need to
measure the widest point between
those two contour lines and
again add 2".
SPECIAL NOTE: Large or scalloped accents
(like the Black Bronco on the
left) may require using
standard half-sheets (2.5' x 4')
rather than accent strips.
If your width exceeds 21", you
may want to consider using the
larger half sheets (30" wide). Order half sheets below.
How to Order
Once you have your measurements,
you're ready to order. You
can choose your accent kit in
any of the 15 popular camo
patterns and choose from the 8
available sizes or half-sheets:
Available in all patterns - an
extra 2.5' x 4' of material for
vehicles with additional items
or areas to cover. 10 more
full sq. ft. to help you
complete your project.
PRICE
$43.00
DELIVERY INFO: Camoclad
orders to the lower 48 states
are shipped directly from the
Camoclad factory in Mounds,
Illinois. Orders are
typically shipped within 1-2
working days and arrive via
UPS/FedEx 1-5 working days
thereafter. Camoclad
orders to Alaska, Hawaii, or
international destinations will
ship from the Hunter's Friend
warehouse via the US Postal
Service. Note:
Camoclad backorders are rare,
but you will be notified if we
expect a change in the posted
delivery schedule.
